2.3: Lab Activities
A list of words is provided below that you are expected to identify, learn, and label on the models provided. Note that not all models will have some of the organs/structures, so be sure to find them on an alternate model. You must use all the words provided. Using the colored tape provided, write the number that corresponds to the organ/structure and place them on your model. When complete, notify your TA so they may check your work.
For each additional station, directions will be provided for the activity.
Station One: Skull
Label the models of this station with the number that corresponds to the appropriate structure of the peripheral nervous system using the colored tape. When you are finished, ask your TA to check your labeling. Before leaving the station, remove all the labels you have placed on the model.
Note: For the following structures, be able to differentiate between left and right halves when applicable.
Bones of Skull
|
#1 frontal bone |
#5 ethmoid bone |
#9 zygomatic bone |
#13 superior nasal conchae |
|
#2 parietal bone |
#6 sphenoid bone |
#10 nasal bone |
#14 middle nasal conchae |
|
#3 temporal bone |
#7 palatine bone |
#11 vomer |
#15 inferior nasal conchae |
|
#4 occipital bone |
#8 maxilla |
#12 lacrimal bone |
#16 mandible |
Skull Bone Markings
|
#18 external auditory meatus |
#20 styloid process |
#22 cribriform plate of ethmoid bone |
#24 zygomatic process of temporal bone |
|
#19 mastoid process |
#21 external occipital protuberance |
#23 olfactory foramina |
#25 temporal process of zygomatic bone |
Special Features of Skull
|
#26 foramen magnum |
#28 foramen ovale |
#30 coronal suture |
#32 lambdoid suture |
|
#27 jugular foramen |
#29 sella turcica |
#31 sagittal suture |
|
Station Two: Axial Skeleton cont.
Label the models of this station with the number that corresponds to the appropriate structure of the peripheral nervous system using the colored tape. When you are finished, ask your TA to check your labeling. Before leaving the station, remove all the labels you have placed on the model.
Note: For the following structures, be able to differentiate between left and right halves when applicable.
|
#1 hyoid Bone |
Vertebral Column
|
#2 vertebrae |
#4 thoracic region |
#6 sacrum |
#8 intervertebral foramen |
|
#3 cervical region |
#5 lumbar region |
#7 coccyx |
#9 intervertebral disc |
Parts of Typical Vertebra
|
#10 body |
#12 lamina |
#14 transverse process |
#16 inferior articular process |
#18 facet of inferior articular process |
|
#11 vertebral foramen |
#13 spinous process |
#15 superior articular process |
#17 facet of superior articular process |
|
Unique Cervical Vertebrae and Characteristics
|
#19 bifid spinous process |
#21 atlas |
#23 dens |
|
#20 transverse foramen |
#22 axis |
|
Thoracic Cage
|
#24 sternum |
#26 sternal body |
#28 ribs |
|
#25 manubrium |
#27 xiphoid process |
#29 costal cartilage |
Station Three: Limb Assembly
In this station, you will be given a bucket filled with random bones some of which you will use to assemble an arm and a leg. Note below which bucket you are working with. Your assignment is to lay out the bones of each limb in their correct positions relative to each other and determine which bones do not belong to either limb. Additionally, you will need to determine whether each limb is a right or left limb; circle your results below. When you are finished, ask your TA to check whether you have assembled and identified your limbs correctly.
Bucket # ________
Upper limb: Left / Right
Lower limb: Left / Right
Station 4: Histology
Sketch the slides available for today’s lab and specify the magnitude at which you are observing/ sketching. Be sure to identify and label your sketch with the corresponding structures listed beneath each slide.
|
Compact Bone
|
Spongy Bone |
Station Five: Upper Limbs
Label the models of this station with the number that corresponds to the appropriate structure of the peripheral nervous system using the colored tape. When you are finished, ask your TA to check your labeling. Before leaving the station, remove all the labels you have placed on the model.
Note: For the following structures, be able to differentiate between left and right halves when applicable.
Clavicle
|
#1 acromial end of clavicle |
#2 sternal end of clavicle |
Scapula
|
#3 glenoid cavity |
#5 coracoid process |
#7 supraspinous fossa |
#9 subscapular fossa |
|
#4 acromion |
#6 spine of scapula |
#8 infraspinous fossa |
|
Humerus
|
#10 head |
#13 lesser tubercle |
#16 coronoid fossa |
#19 lateral epicondyle |
|
#11 neck |
#14 trochlea |
#17 radial fossa |
#20 olecranon fossa |
|
#12 greater tubercle |
#15 capitulum |
#18 medial epicondyle |
|
Ulna
|
#21 head |
#23 trochlear notch |
#25 radial notch |
|
#22 olecranon |
#24 coronoid process |
# 26 styloid process |
Radius
|
#27 head |
#29 radial tuberosity |
|
#28 neck |
#30 styloid process |
Hand and Wrist
|
#31 carpals (8) |
#33 phalanges |
#35 middle phalanges |
|
#32 metacarpals |
#34 proximal phalanges |
#36 distal phalanges |
Station Six: Lower Limbs
Label the models of this station with the number that corresponds to the appropriate structure of the peripheral nervous system using the colored tape. When you are finished, ask your TA to check your labeling. Before leaving the station, remove all the labels you have placed on the model.
Note: For the following structures, be able to differentiate between left and right halves when applicable.
Pelvis
|
#1 ilium |
#3 ischium |
#5 pubis |
#7 acetabulum |
|
#2 iliac crest |
#4 ischial spine |
#6 pubic symphysis |
|
Femur
|
#8 head |
#11 lesser trochanter |
#14 medial condyle |
|
#9 neck |
#12 medial epicondyle |
#15 lateral condyle |
|
#10 greater trochanter |
#13 lateral epicondyle |
#16 intercondylar fossa |
|
# 17 patella |
Tibia
|
#18 lateral condyle |
#19 medial condyle |
#20 medial malleolus |
Fibula
|
#21 head |
#22 lateral malleolus |
Foot and Ankle
|
#23 tarsals (7) |
#25 metatarsals |
#27 proximal phalanges |
#29 distal phalanges |
|
#24 calcaneus |
#26 phalanges |
#28 middle phalanges |
|